Instructions for Fastlink® Fence Ender

1.work for 1.8-3.2mm wire

2.Wrap the wire around the strainer post

3. Push the line wire into the hole and push in the direction of the arrow

4. Clip the Fence Ender on the line wire being secured, creating a termination. 

NOTE if using pre-fabricated fencing, ensure the Fence Ender is on the “inside” of any picket wires

5.Pull the excess line wire through the Fence Ender, and pull as tight against the Strainer Post as possible

6.Repeat these steps with all line wires

For maximum security, wrap excess wire around the line wire as if tying off